1-72 iso C wide temperature range model 96 ultrastable? 316l ss pressure sensor high performance 0-100 mv output absolute and gage low pressure t hydraulic controls t process control t oceanography t refrigeration/compressors t pressure transmitters t level systems features t 1/4 npt thread, 5/8" hex t C20c to +85c compensated temperature range t 0.1% pressure non-linearity t 1.0% interchangeable span (provided by gain set resistor) t solid state reliability t low power standard ranges range psig psia 0 to 15 c c 0 to 30 cc 0 to 50 c c 0 to 100 cc 0 to 300 c c 0 to 500 cc description the model 96 is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316l stainless steel housing. the model 96 is available with a standard ? npt fitting. the sensing package utilizes silicone oil to transfer pressure from the 316l stainless steel diaphragm to the sensing element. the model 96 is designed for high performance, low pressure applications. a ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction. an additional laser- trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within 1%. sensors with o-ring fittings, and high pressure sensors are also available. please contact factory for more information. dimensions
316l ss pressure sensor model 96 ultrastable? iso C wide temperature range 1-73 april 2000 performance specifications all parameters specified at 1.5ma and at 25c, after 10 second warm up, unless otherwise indicated. unless specifically indicat ed, only those parameters indicated as tested are verified on each part. parameters are specified for the compensated version only. notes 1. for amplified output circuits see application note tn-003. 2. measured at vacuum for absolute (a), ambient for gage (g). 3. best fit straight line. 4. over the temperature range C20c to +85c with respect to +25c. 5. 15 psi range sensors have an offset temperature error of 0.75% (max) from C20c to +85c. 6. guarantees output/input ratiometricity. 7. load resistance to reduce measurement errors due to output loading. 8. between case and sensing element. 9. maximum temperature range for product with standard cable and connector is C20c to +105c. 10. weight depends upon configuration (cable, connector, pressure fitting). ordering information connections application schematic parameters min typ max units notes full scale output span 75 100 125 mv 1 zero pressure output (offset) C1 0 1 mv 2 pressure non linearity C0.10 0.10 % span 3 pressure hysteresis C0.05 0.02 +0.05 % span repeatability 0.02 % span input and output resistance 2000 3500 4500 w temperature error - span (C20c to +85c) C0.75 +0.75 % span 4 temperature error - offset (C20c to +85c) C0.5 +0.5 % span 4, 5 thermal hysteresis - span 0.05 % span 4 thermal hysteresis - offset 0.05 % span 4 long term stability - span 0.1 % span/year long term stability - offset 0.1 % span/year supply current 0.5 1.5 2.0 ma 6 output load resistance 5 m w 7 insulation resistance (50 vdc) 50 m w 8 pressure overload 3x rated compensated temperature range C20c to +85c 9 operating temperature range C40c to +125c 9 storage temperature range C50c to +125c 9 media - pressure port liquids and gases compatible with 316l stainless steel media - reference port compatible with silicon, pyrex, gold, fluorosilicone rubber and 316l stainless steel weight 27 g 10 pad / conductor no function 1 +out 2-ex 3 +ex 4-out 5 gain 6gain 96 - 050 g - 4 c t t = vent tube, blank is standard = no tube electrical (c = ribbon cable with connector, = ribbon cable, l = lead, uncompensated) pressure port (4 = 1/4 npt) type ( g = gage) pressure range (15 to 500 psi, 050 = 50 psi) model p = solder pads, r a = absolute, electrical ( electrical ( for other pressure ranges, process fittings and electrical connections contact factory.
|
